Water Damage Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are 2 large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage due to water guide is the benchmark tool that is utilized by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the first and the most significant element of water damage and mold restoration. The assessment has to be correct so that a suitable response can be taken. In restorating the harm brought on by water, technicians as well as the insurance providers must work together and know what is damaged and how to go about restoring the damage. Identifying the cause from the damage, documentation of damage, and accurate estimates are mandatory to get a proper water damage and mold restoration. Categorization is based on the contamination levels of the water source. The categories are highlighted below
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This is water which includes some contaminants like water coming from a dishwasher, washing machine or toilet with urine.
Category 3 – This is water that is certainly highly unsanitary and can do causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a handful of examples.
Decontamination and Drying – After the evaluation is finished, the whole process of drying and decontaminating begins on the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is restricted to some small area and fewer water has become absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is to the whole room and carpet area. Class 3 Damage – Once the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination needs to be done if contamination continues to be detected in the area. Decontamination may be performed for the whole area or in specific pockets where contamination has been detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused because of damage is critical to get the desired results. One must be proactive throughout the monitoring process. Checking if the drying devices are setup properly, assessing when the personnel involved are qualified for the job and checking in the event the equipments are in working order inwtsy all portion of the monitoring process. Necessary steps should be taken if anything wrong is spotted during the monitoring process. The complete procedure of water damage and mold restoration would be considered complete only once the humidity, temperature as well as the moisture content is really as per industry standards. Upon finishing of this type of water damage restoration process, the drying equipment can be removed.