Do-it-yourself wooden garden storage boxes are a simple method of storing seasonal and temporary items. Wooden storage boxes can be used within the garage, on the patio or in a storage shed to hide seasonal equipment, including patio sets, pool equipment, bikes and machinery. While it is possible to purchase a storage box at a hardware store, building a wooden one at home is a cheaper alternative as well as the box can be personalised and custom-built to fit into any space.
Appraise the space where the Godwins Removals – Storage Boxes For Gardens will likely be placed, and take note of the figures for the height, width and depth you need the package to get. Draw the pieces required for the four sides of the box on the plywood sheets, employing a pencil. You will want two side pieces measuring height by depth, and the front and back pieces should measure height by width. Eliminate the 4 pieces using the saw. Make use of the sandpaper to make the edges and surfaces smooth and splinter-free.
Arrange one of the side pieces so it is perpendicular to the front piece. Both pieces ought to be on end, and also the end in the side piece should be covered by the outer lining side in the front piece. In other words, the side pieces is going to be attached in the back and front piece ends.
Attach both pieces utilizing the drill and at least four screws with the front piece. Attach the next side piece in the same manner to the opposite end from the front piece. Ensure the second side piece’s end is inside the front piece. Last, attach the back piece with the drill and screws, so both ends of the side pieces are protected by this last piece. You need to now have a rectangular wooden frame.
Appraise the rectangular frame’s perimeter. This may supply the measurements for the bottom and lid pieces. Write the measurements down. Transfer the measurements for the plywood, utilizing a pencil. Be certain they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it up to the wooden frame. Put the level on the box to guarantee the piece is level and also. Attach it with screws placed every 6 inches, drilling the screws from the bottom piece and into comfou four sides. When done, turn it over, so you have an open box without a lid.
Attach two hinges towards the lid piece, screwing those to the underside of one of the long sides. Flip the wooden garden storage box on its side to put in the lid properly. Line the lid as much as the package so the hinges are within the box and attach the hinges using screws and also the screwdriver. Flip the wooden storage box right side up and close the lid.